FOR CONTRACTORS & PROFESSIONALS/QUOTING · COLLABORATION · FIELD WORK

    Better data from your
    customer — before you
    step on site.

    FenceLogic gives contractors two things: a faster internal quoting tool, and a new way to collaborate with customers — so you arrive at every job with a structured brief, accurate dimensions, and a pre-validated material list already in hand.

    STEP 2 · DRAW YOUR FENCE
    35.4831°N · 106.0731°W
    Louis RdEliza RdCarlson RdCienega CreekGATE 12ft843 ft319 ft1078 ft244 ft

    Perimeter

    3,518 ft

    CUSTOMER-SUBMITTED PROJECT · AWAITING REVIEW

    The current workflow

    Too much time spent before a job is even won.

    A customer calls. You arrange a site visit. You measure, photograph, note the terrain. Back at the office you estimate materials, write up the quote, send it over. Customer asks for changes. You revise. Only then do you know if the job is yours.

    For a project that might not convert, that’s two to four hours of unbillable time — before a single post goes in the ground.

    BEFORE

    Site visit needed to measure

    AFTER

    Customer draws on satellite map from home

    BEFORE

    Freeform enquiry email

    AFTER

    Structured project brief with dimensions, animal type, gate positions

    BEFORE

    Manual material estimate

    AFTER

    Engine-calculated BOM, accurate enough to order from

    The collaboration flow

    Customer does the groundwork. You do the expert review.

    This is not a self-service tool that replaces the contractor. It’s a structured intake form that replaces unstructured phone calls and email enquiries — so you receive complete, usable project data before the first conversation.

    Project Request FlowContractor: Weber Fencing Co.
    1
    Customer

    Opens your booking link or embedded tool

    No account required. Branded with your company identity.

    2
    Customer

    Selects animal type & fence system

    Chooses from pre-set options — no technical knowledge needed.

    3
    Customer

    Draws fence on satellite map

    Searches address, clicks corners, places gates. Slope auto-detected.

    4
    Customer

    Submits request with contact details

    No price shown to customer — request goes directly to your inbox.

    5
    You

    Receive structured brief in your dashboard

    Map, dimensions, fence type, gate count, slope data — all pre-filled.

    6
    You

    Refine BOM and send formal quote

    Adjust post spacing, add material margin, apply your labour rate — done in minutes.

    STEP 1 · WHAT ARE YOU FENCING?CONFIGURE

    Cattle

    High-tensile · 8 strands

    Horses

    Non-climb · 4 ft

    Sheep / Goats

    Woven wire · 5 ft

    Deer / Wildlife

    High fence · 8 ft

    Poultry

    Chicken wire · 6 ft

    Fence type

    High-Tensile Wire · 12.5 ga

    Wire strands

    8 strands · 6 "" bottom spacing

    Post spacing

    8 ft · driven steel

    Energizer needed

    Yes · 2–4 J recommended

    Configuration auto-selected based on animal type · adjust any parameter manually

    Customer-facing intake · Your branding · No price shown

    Internal quoting tool

    Use it yourself. Quote any job in minutes.

    Beyond customer intake, FenceLogic is a fully-featured internal quoting tool. Plan any project yourself — search the address, draw the fence, configure the system. The engine handles slope correction, H-brace placement and post spacing. You get a build-ready BOM that’s accurate enough to order from directly.

    Slope & terrain correction

    Post spacing adjusted automatically on steep ground — no manual calculation

    H-brace auto-placement

    Corner and end strainer positions determined by the engine based on load and angle

    Build-ready BOM

    Every post, wire roll, crimp sleeve, gate fitting and concrete bag — nothing missing

    PDF for the client

    Professional quote summary with map view and full material breakdown

    BILL OF MATERIALS · BUILD-READYSYNCED · ERP
    SKUItemUnitQty€ / unit
    FL-PST-CRN-2400End / corner post · 2.4 m · galvanizedea12€ 38.40
    FL-PST-LIN-1800Line post · 1.8 m · drivenea82€ 18.20
    FL-WIR-HT125High-tensile wire · 12.5 ga · class 3m3 414€ 0.41
    FL-STR-INLIn-line strainer · ratchetedea16€ 7.90
    FL-CRP-S25Crimp sleeve · 2.5 mm · sealedea212€ 0.18
    FL-BRC-H-CORH-brace assembly · corner kitset4€ 64.00
    FL-INS-CORInsulator · corner · UV-stableea32€ 1.10
    FL-CON-25KGConcrete · 25 kg bagbag48€ 4.80
    FL-GTE-400Gate set · 4.0 m · double swingset1€ 412.00
    Subtotal · 9 line items487.2 m€ 14,820.40

    Build-ready BOM · Accurate enough to order and build from directly

    In the field & beyond

    Works on site, in the office, and in your existing software.

    Mobile-ready

    Full functionality on tablet or phone — draw on-site while walking the property

    GPS walk & map

    Walk the fence line with your phone — GPS track recorded and converted to a BOM automatically

    API integration

    Connect FenceLogic to your CRM, job management or estimating software via REST API

    Project archive

    Every completed project saved — searchable, shareable, and re-openable for variations

    Next step

    Ready to quote faster and arrive better prepared?

    Request access and see FenceLogic set up as your customer intake tool and internal quoting platform — running under your brand, routing to your workflow.